How to use hot melt adhesive film?

How to use hot melt adhesive film?
Regarding the use of hot melt adhesive film, it can be divided into two situations. One is the use of non-mass production: such as use in small areas, and use in small-scale stores with processing properties (such as curtains Stores); the second situation is the need for mass processing and use in industrial production. For the use of hot-melt adhesive film in non-mass production, first of all, the hot-melt adhesive film or hot-melt mesh film they use are mainly conventional models, and generally there are no special requirements. Under such a large demand scenario, the tools used in combination are mainly ironing machines, heat transfer machines and irons, and the melting point of the hot melt adhesive used will not be too high. When bonding, adjust the composite tool to the corresponding temperature and iron hard for 10-20 seconds to complete the composite bonding. The overall operation is not difficult. If there is degumming and weak bonding, it may be that the selected hot melt adhesive has a deviation or the ironing temperature is not enough. After analyzing the specific cause, we will make targeted Just adjust.
In the case of industrial production that requires batch processing, it is necessary to make changes to the composite equipment. Since it is necessary to meet the requirements of production capacity, it is necessary to choose to use a professional thermal laminating machine. At present, there are still many types of thermal laminating machines. Whether it is hot melt adhesive film or hot melt net film, the applicability of laminating machines is relatively strong. Therefore, for factories that already have thermal laminating machines, Even if the hot melt adhesive film type is changed, there is basically no need to purchase the corresponding composite equipment.

From a composite point of view, the use of hot melt adhesive film is not difficult. The difficulty is how to choose the right type of hot melt adhesive film. Even if there are a large number of cases of the same type for reference, in view of various factors such as the production process and environment of various enterprises, it may still cause differences in selection. Therefore, it is very important to do a good job in the preliminary sample work.